- Only 1.25 inch (3.8 cm) in diameter
- Omnidirectional polar pattern
- Wide dynamic range and smooth frequency response
- Logic input for remote LED control
- Radio Frequency filtering CommShield Technology
- Includes rubber isolation rings and fastening hex nut
- Type: Condenser (electret bias)
- Frequency Response: 50”17000 Hz
- Polar Pattern: Omnidirectional
- Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
- Output Configuration: Active balanced
- Sensitivity (at 1 kHz , open circuit voltage): ”28 dBV/Pa (42 mV) 1 Pascal=94 dB SPL: Maximum Sound Pressure Level (1 kHz at 1% THD, 1 kOhms load): 114 dB
- Equivalent output Noise (A-weighted): 21 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 73 dB
- Dynamic Range (1 kOhms load at 1 kHz): 93 dB
- Common Mode Rejection (10 Hz”100 kHz): 45 dB minimum
- Preamplifier output Clipping level (1% THD): ”8 dBV (0.4 V)
- Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Weight Net: 0.30 lbs. (0.136 kg)
- Logic Connections: LED IN: Active low (‰¤1.0V), TTL compatible. Absolute maximum voltage:-0.7V to 50V.
- Environmental Conditions: Operating Temperature: -18”57 C (0”135 degrees F); Storage Temperature: -29”74 degrees C (-20”165 degrees F); Relative Humidity: 0”95%
- Power Requirements : 11”52 Vdc phantom, 2.0 mA
Reviews
There are no reviews yet.